Container Size – 58 x 74 x 110 cm
Container Volume – 240 litres
Container Colour – Blue
Pack Wt (gross) – 31.1 kg
Sorbency – 165 – 210 litres

Sorbency: Lower figure test method to BS 7959-1:2004 using SAE10W40 motor oil. Higher figure based on high viscosity liquid with no drain
Container: Heavy duty, UV stabilised highly visible, water proof container with two wheels.

Fully opening lid allows for ease of access to contents.
Contents: 150 Oil Pads
2 Oil Cushions
5 Oil Socks 125 x 7.5 cm
1 Oil Sock 300 x 7.5 cm
1 Dammit X Mat 65 x 45 cm
1 Dammit X Ready Mix 800g
1 Personal Safety Kit
3 Disposal bags and ties
Replenishment: A full refill kit is available for this product. Please use code 0174/7/R.
To order further kits, refill sets or packs of individual items please contact us.
Instructions for use: It is important that a suitable and sufficient Risk Assessment is carried out on each incident and correct PPE is worn.
Depending on the nature of the spill a combination of the contents of the kit may be used.
Pack Type: Wrap
Compatibility: The absorbents within this kit may be safely used with all liquids immiscible with water, such as hydrocarbons, solvents, mineral oils.
Water-repellency exceeds requirements of BS 7959-2:2000.
Before any use in a spill situation a proper risk assessment should be carried out and all hazardous properties of the liquid or dangerous reactions taken into account.
Revision Date: 01-07-2016
Disposal: Used sorbents may be disposed of by landfill or incineration, in accordance with local and national regulations, taking into account the classification of the liquid absorbed.
Safety Data: Further technical advice is available if required.
Note: All weights, dimensions, and other figures quoted are approximate.