Description

Container Size – 50 x 12 x 50 cm
Container Volume – n/a
Container Colour – Clear
Pack Wt (gross) – 1.3 kg
Sorbency – 10 – 15 litres

Sorbency: Lower figure test method to BS 7959-1:2004 using water. Higher figure based on high viscosity liquid with no drain
Container: Clear plastic snap handle bag
Contents: 10 Chemical Pads
2 Chemical Socks 125 x 7.5 cm
1 Disposal bag and tie
Instructions for use: It is important that a suitable and sufficient Risk Assessment is carried out on each incident and correct PPE is worn.
Depending on the nature of the spill a combination of the contents of the kit may be used.
Pack Type: Bag
Compatibility: The absorbents within this kit may be safely used with all aqueous solutions and liquids immiscible with water, such as hydrocarbons, solvents, mineral oils, with the exception of strong oxidising agents.
Before any use in a spill situation a proper risk assessment should be carried out and all hazardous properties of the liquid or dangerous reactions taken into account.
Disposal: Used sorbents may be disposed of by landfill or incineration, in accordance with local and national regulations, taking into account the classification of the liquid absorbed.
Safety Data: Further technical advice is available if required.
Note: All weights, dimensions, and other figures quoted are approximate.